DCS-100HIT C&D Deep Cycle Series Battery

DCS-100HIT DEEP CYCLE SERIES C&D BATTERIES

Power Storage Solutions is the LARGEST, OEM Authorized, stocking distributor for the C&D Technologies Deep Cycle Series batteries. The DCS-100HIT Deep Cycle Batteries are valve regulated lead acid batteries designed for cycling applications. It's robust plate for extended life cycle and computer generated grid design make these batteries durable for demanding applications requiring the ability to withstand abusive storage and operating conditions. DCS batteries are designed and manufactured for maximum life in applications which are a combination of float and cycle service or for frequent cycling applications. DCS technology performance is well known in the industry as the leader in high cycle counts and long life.

DCS-100HIT APPLICATIONS

•  Accelerated Processing Unit
•  HVAC
•  Liftgate
•  Refrigeration
•  Electric Vehicles

DCS-100HIT FEATURES AND BENEFITS

• Robust plate for extended cycle life
• Computer generated grid design optimized for high power density
• Low calcium grid alloy for reduced gas emissions and ease of recycling
• Flame-arresting one-way pressure-relief vent for safety and long life
• UL-recognized component
• Multicell design for economy of installation and maintenance
• Rugged polypropylene case and cover
• Thermally welded case-to-cover bond to eliminate leakage
• Removable carrying handles (HIT Versions)                                                                                                                                                                                                                        •Can be used in any orientation. Upright, side, or end mounting recommended
• Absorbent Glass Mat (AGM) technology for efficient gas recombination of up to 99% and freedom from electrolyte maintenance

DCS-100HIT Specifications

• Voltage: 12 volt
• Amp Hour: 100 Ah 20 hr. rate to 1.75 volts per cell at 77°F (25°C)
• Terminal Type: Inserted Terminal (Copper Alloy)
• Terminal Hardware Initial Torque:  110 in.-lbs (12.4 N-m)
• Normal operating temperature range: +68°F (20°C) to +80°F (27°C)
  • Discharge: -40°F (-40°C) to +160°F (71°C)
  • Charge: -10°F (-23°C) to +140°F (60°C)
• Recommended Maximum Charging Current Limit: C/5 amperes @ 20hr rate
• Float charging voltage 13.5 to 13.8 VDC/unit Average at 77°F (25°C)
• Battery can be stored up to 6 months at 77°F (25°C) before a freshening charge is required. Batteries stored at temperatures greater than 77°F (25°C) will require recharge sooner than batteries stored at lower temperatures..

DCS-100HIT Compliance

• Not restricted for air transport - Complies with IATA/ICAO Special Provision A67
• Not restricted for surface transport – classified as non-hazardous material as related to DOT-CFR Title 49 parts 171-189
• Non-Hazardous, not restricted for any transportation mode (air, water or land)

Power Storage Solutions Engineering Services for DCS-100HIT

We utilize C&D Deep Cycle Series Selection Application to quickly calculate many values essential for the proper selection of standby battery products We provide expert sizing analysis you need to properly size and select the proper battery.  Let our Battery Sizing Specialist ensure you select the correct product.

This includes the ability to:  Select batteries based on complex step loads and generate IEEE-485 Sizing Work Sheets.  Select batteries based on constant current loads. Select batteries based on constant power loads. View and customize rating tables. Perform battery run time analysis.

Power Storage Solutions Installation and Service for DCS-100HIT

We understand your operations are heavily reliant on batteries for backup power.  Our experience and our focus is to know the batteries and their implication for your operation. To determine the perfect solution, we will partner with you, analyze your critical power needs and construct the backup power solution that will perform as designed.

Routine maintenance ensures your equipment stays reliable, improving your overall performance and extending their useful life. Service plans allow customers to be proactive; providing opportunity to detect potential points of failure preventing expensive problems.

When ordering new batteries, also remember to properly recycle your old lead batteries. Federal and state regulations require lead-acid batteries be recycled. Power Storage Solutions’ nationwide service organization can arrange pickup, transportation to and recycling at any one of our company affiliated smelters. Click Here for More Information

For More Information from C&D Technologies Website: DCS Series